QMS SmartWriter 80+ User Manual page 416

I
<ESC>*n1P
I
Print Pattern
This command causes the most recently defined pattern to
be printed in the most recently defined pattern area.
Parameter ntis selected from the table below:
Value Pattern Description
o
Solid black rule
2 Gray scale pattern
3 Line graphic pattern
Patterns are not affected by margins, perforation skip mode
or end-of-line wrap. Printing a pattern does not change
the current print position.
H.S Examples
The commands below print a solid black rectangle (rule)
IIlO-inch high by 3 inches wide, starting one inch from
the left and two inches from the right of the top corner of
the page.
<ESC>&a720h1440V
<ESC>*c2160h72V
<ESC>*cOP
The commands below fill an 8-inch high by 10-inch wide
area with a 25 percent gray scale pattern.
<ESC>*c5760h7200V
<ESC>*c25G
<ESC>*c2P
The commands below fill an 8-inch high by 10-inch wide
area with a horizontal bar pattern.
<ESC > *c5760h7200V
<ESC>*c1G
<ESC>*c3P
H-50 HP Emulation Mode