Table of Contents
Advertisement
H
Forms Control Commands
The Forms Control Commands allow you
to
place the cur-
rent print position almost anywhere on the page. These
commands will be most useful when printing on pre-
printed forms. Remember, paper size and orientation must
be considered when using these commands.
• FORM FEED ejects the current page from the printer.
• CARRIAGE RETURN moves the current position to
the Left Margin depending on the status of Group E
Option 2.
• SET FORMS LENGTH TO On' INCHES establishes
a value in inches for the length of the page to be
printed.
• SET FORMS LENGTH TO On' LINES establishes a
value in lines for the length of the page to be printed.
[ <FF>
I
FORM FEED
This command (decimal 12) allows you to execute a Form
Feed without having to take the printer off-line and use
the
I
FORM FEED
I
key.
If
a Top-of-Form has been set,
the print position will advance to that point.
If
no Top-of-
Form is set, advance will be to the top of the page.
I
<CR>
I
CARRIAGE RETURN
This command (decimal 13) causes the printer to execute
a carriage return. The status of Group E Option 2 affects
how a <CR> is interpreted.
Appendix E
E-23
Advertisement
Table of Contents
