Table of Contents
Advertisement
G.4
Print Quality Problems
Below are listed several print quality problems with pos-
sible solutions. Try the solutions in the sequence given.
If the solutions listed do not solve the problem, place a
service call.
• White or Light Lines
1. Remove the print cartridge and rotate it as you
do before installing a new cartridge. This redis-
tributes the toner inside the print cartridge.
2. Install a new print cartridge.
• Light Image (entire page)
1. Increase the print density by using the print den-
sity adjustment dial on the left side of the printer.
2. Remove the print cartridge and rotate it as you
would when installing a new cartridge. This re-
distributes the toner inside the print cartridge.
3. If the cartridge indicator is red, install a new
print cartridge. If it is not red, make sure the
sealing tapes are properly removed from the car-
tridge.
• Dark Image (entire page)
5-18
1. Decrease the print density by using the print den-
sity adjustment dial on the left side of the printer.
2. Remove the print cartridge and rotate it as you
would when installing a new cartridge. This re-
distributes the toner inside the print cartridge.
3. Install a new print cartridge.
Maintenance and Troubleshooting
Advertisement
Table of Contents
