Table of Contents
Advertisement
• NO ESCAPEMENT/pRINT POSITION MOVE al-
lows two different characters to be printed in the same
position.
I
<Esc>$l WPS "ON"
This command implements Proportional Character Spac-
ing. That means that each character is assigned a print
space (in l/120th inch increments) according to the width
of the character. Wide characters such as "w" or "m" are
allotted more space than narrow characters such as "1" or
"i." Proportional spacing may also be enabled by using
the keypad to configure Group
Q
Options 1 and 2.
I
<ESC>%
I
WPS "OFF"
This command terminates WPS Mode. Positioning re-
turns to fixed character spacing. The settings of Group
Q
Options 1 and 2 are not affected by this command.
Examples:
Proportional spacing taKes effect
after the <ESC>$.
Proportionally
spaced
characters are closer together
than fixed spaced characters. This may
or may not be the appearance you
desire.
The proportional
spacing has been
turned off
for this sentence.
Qume Emulation Mode
G-25
Advertisement
Table of Contents
