Table of Contents
Advertisement
I
<Esc>@1 MASTER RESET CODE
This command resets the printer to its power-up default
conditions. All text and control codes will be cleared from
the print buffer and all download fonts will be deleted.
Use this command with extreme caution!
G
Paper Feed Commands
The Paper Feed Commands control movement of the paper
through the printer. These commands include changing
line spacing values and reverse line feeds.
• LINE FEED advances the current position one line
in the direction of printing.
• SET LINE SPACING TO 1/8 INCH establishes a
line spacing value of 8 lines per inch.
• SET LINE SPACING TO 7n2 INCH establishes a
line spacing value of "7-dot spacing."
• SET LINE SPACING TO 1/6 INCH establishes a
line spacing value of 6 lines per inch.
• SET LINE SPACING TO n/72 INCH allows you to
establish your own line spacing value in 1n2" incre-
ments.
• SET LINE SPACING TO n/216 INCH allows you
to establish your own line spacing value in 1/216"
increments.
• SINGLE n/216 <LF> WITHOUT <CR> causes an im-
mediate line feed of n/216".
• SINGLE n/216 REVERSE <LF> WITHOUT <CR>
causes an immediate reverse line feed of n/216".
E-20
Appendix E
Advertisement
Table of Contents
