Table of Contents
Advertisement
I
<ESC>M
I
AUTO MARGIN JUSTIFY
This command is used to provide even Right and Left
Margins using either fixed space characters or Proportional
Space Mode. Each line of data is stored until a Carriage
Return or Line Feed is received. The Carriage Return or
Line Feed causes the data in that line to be printed between
the two margin settings. Auto Justify remains in effect for
subsequent lines until an <ESC>X is received.
Auto Justify will begin after the first Carriage Return fol-
lowing the Auto Justify command.
If
too many or too few
characters are sent for the amount of space available, the
line will not be justified.
Examples:
The following passage uses font 380, "Epson Compressed."
JUstification causes the
right and
left mar-
gins
to
be
"even"
or
"flush."
Just If led
margins wi I I only occur when enough characters
appear
on
the
line
and
the
number
of
char-
acters does not exceed the right margin.
If
too many or too few characters are on the line,
the
I Ina wi I I not Justify.
Justification Is turned off by the
<ESC>X command.
Diablo Emulation Mode
0-27
Advertisement
Table of Contents
