Table of Contents
Advertisement
Page length
Orientation
Paper source
Copy count
Margins (top. left. right)
Perforation skip mode
Line termination
End-of-line wrap
Font attributes
HMI
Text length
Character code
Macro ID
VMl/line spacing
Horizontal rule spacing
Vertical rule size
Underline mode
Graphics resolution
Graphics mode
Graphics left margin
Pattern ID
RmtID
Any changes made to the current environment during macro
execution remain in effect after the macro is completed.
I
<ESC>&f3X
I
Call Macro
This command is identical to Execute Macro, except that
the current environment is restored after the macro is com-
pleted, and any changes to the environment made during
macro execution are discarded. Note that the cursor po-
sition will have been moved in response to the macro
commands.
I
<ESC>&f4X
I
Enable Overlay
This command causes the currently identified macro to be
automatically executed at the end of each printed page.
The specified macro supercedes any previously enabled
macro overlay.
The overlay environment comprises the current values of
the following variables:
Overlay
Page length
Orientation
Input control
Copy count
HP Emulation Mode
H-53
Advertisement
Table of Contents
