QMS SmartWriter 80+ User Manual page 270

times. Certain Print Widths take priority over others as
shown in Table 1 (Pica is the default and has the lowest
priority). When using Elite or Compressed Mode, a Width
Statement may be required to enable more than 80 char-
acters per line to be sent before a <CR> is automatically
inserted into the data stream. Refer to your computer
system's documentation to determine the correct format
needed to do this.
E-8
Elite
Proportional
Compressed
Pica
Table 1 Mode Priorities
Typeface
Roman (default)
Italic
Pitch
Pica (default)
Elite
Compressed
Spacing
Monospaced (default)
Proportional
Quality
Single-Strike (default)
Double-Strike
Emphasized
Table 2 Print Defaults Summarized
Appendix E