QMS SmartWriter 80+ User Manual page 278

Table of Contents

Advertisement

I
<ESC>pll
PROPORTIONAL MODE
Proportional Mode allots space to each character accord-
ing to the width of that character. The space allotted to
"i" will be less than that allotted to "m". This results
in more natural looking spacing within words. Propor-
tional Mode may not be used in Elite, Compressed,
Superscript, Subscript, or Double-Strike Mode. Pro-
portional Mode automatically uses Emphasized Pica
and, therefore appears to be darker and bolder than
Single-Strike. Printing speed is not affected.
I
<ESC>pO
I
DISABLE PROPORTIONAL MODE
This command terminates Proportional Mode and returns
the printer to the Mode that was in effect before entering
Proportional Mode.
Examples:
Proportional spacing takes effect
after the <ESC>p1. Proportionally
spaced characters are closer together
than fixed spaced characters. This may
or may not be the appearance you
desire.
The proportional spacing has been
turned off for this sentence.
I
<ESC>.ll
UNDERLINE MODE
The Underlining facility may be used with any Print Width
or Print Quality. Underline Mode is also turned on by "-
CHR$<SOH>".
E-16
Appendix E

Advertisement

Table of Contents
loading

Table of Contents