Table of Contents
Advertisement
I
<ESC>G
I
DOUBLE·STRIKE MODE
Double-Strike (Near Letter Quality) characters appear darker
but no wider than Normal characters.
I
<ESC>H
I
DISABLE DOUBLE-STRIKE MODE
Turns Double-Strike Mode off and returns printer to Nor-
mal print.
I
<ESC>I<n>
I
SELECT PRINT QUALITY
This command selects the print qUality.
n = 0 Produces Normal Quality (standard font).
n
=
2 Produces Near Letter Quality (standard font).
n
=
4 Produces Normal Quality (download font).
n
=
6 Produces Near Letter Quality (download
font).
I
<ESC>SO
I
SUPERSCRIPT
When Superscript Mode is enabled, characters will be
raised above the normal print line. Superscript Mode stays
on until the command to terminate is received.
I
<ESC>Sll
SUBSCRIPT
When Subscript Mode is enabled, characters will be low-
ered below the "normal print line. Subscript Mode stays
on until the command to terminate is received.
I
<ESC>T
I
CANCEL SUPERSCRIPT/SUBSCRIPT l\fODE
This command terminates either Superscript or Subscript
Mode.
F-lO
Proprinter Emulation Mode
Advertisement
Table of Contents
