Table of Contents
Advertisement
print position off the top of the stack. Any other positions
on the stack are popped one level further up the stack.
Each print position saved on the stack contains both the
vertical and horizontal location of the current position.
F
Font Definition
Fonts are available from three sources:
1. Resident fonts internal to your printer;
2. Optional
cartridge fonts
which plug into your printer
front panel; and
3.
Downloadable fonts,
which are transferred from disk
files to your printer.
By using the supported font definition and selection com-
mands explained here and the Printer Software Commands
explained in Part IV you may use up to 64 different fonts
per page. s
NOTE:
Font cartridges designed for LaserJet printers will
not work with your QMS laser printer. However, down-
load fonts for LaserJet printers are compatible with your
QMS printer.
F.1
Font Description
LaserJet Emulation Mode uses a technique for font selec-
tion, whereby the printer selects the font which is
closest
to the specification you provide. Font characteristics are
5Use of the Printer Software command to select fonts will introduce com-
patibility problems if you attempt to print files using the command on an
HP LaserJet printer.
HP Emulation Mode
H-23
Advertisement
Table of Contents
