Table of Contents
Advertisement
If
none of the available fonts has the specified character
style, the command is ignored. Note that an italic font
must be available to print in italics (the printer will not
slant upright fonts into pseudo-italics).
I
<ESC>nlSn2B
I
Character Weight
This command specifies light, medium or bold weight for
the primary or secondary font. Parameter
nl
selects the
primary or secondary font, and
n2
is the desired character
weight, coded as follows:
Value Range
-lto
-7
o
lto
7
Character Weight
Light
Medium
Bold
Each font has an exact weight in the range
-7
to +7. If
none of the available fonts has the weight you specify, the
printer defaults to the font with the closest weight.
Examples are provided in the table below:
Character Style
Light
Medium
Bold
I
<ESC>nlsn2
T
I
Typeface
Command for Font:
Primary
Secondary
<ESC>(s-3B
<ESC»s-3B
<ESC>(sOB
<ESC»sOB
<ESC>(s3B
<ESC»s3B
This command selects the typeface for subsequent print-
ing. Parameter
nl
selects the primary or secondary font,
and
n2
is the desired typeface from the following list.
HP Emulation Mode
H-29
Advertisement
Table of Contents
