QMS SmartWriter 80+ User Manual page 311

B
Unsupported Proprinter Com-
mands
The following Proprinter commands are not supported by
the printer.
If
these commands are sent to the printer, they
will be absorbed and will not affect printer operation.
Print Mode Commands
<SO> or Double Wide Printing by Line
<ESC><SO>
<ESC>WO Double Wide Printing OFF (set by <SO»
<DC4> Double Wide Printing OFF (set by <SO»
<ESC>UI Print in One Direction (left
to
right)
<ESC>UO Print in Two Directions
<ESC> WI Begin Continuous Double Wide Printing
<ESC>WO Cancel Continuous Double Wide Printing
Page Format Commands
<ESC>4 Set Top of Form
<ESC>N<n> Set Automatic Perforation Skip (n lines)
<ESC>O Cancel Automatic Perforation Skip
Printer Control Commands
<BEL> Sound Beeper
<CAN> Cancel Data
<DC3> Ignored (same as <NUL»
<ESC>Q3 Deselect Printer
<DCI> Select Printer
<DC3> Deselect Printer
Proprinter Emulation Mode
F-5