Table of Contents
Advertisement
G.2
Error Codes
Code Meaning
Explanation
CE
Controller Er-
The printer's controller has stopped function-
ror
ing.
Turn the printer off and back on again.
The printer will print a diagnostic page for the
error.
If the problem reoccurs, contact your
dealer/distributor.
CO
Cartridge Out
There is no print cartridge installed in the printer.
FE
Font Error
There are no fonts available for printing. Turn the
printer off and back on in order to get a diagnostic
page of the error.
IE
Interface Er-
There is a problem with the interface protocols
ror
(see Part III Sections 0, P, and 0). The interface
characteristics for your printer and computer must
match.
PE
Printer Er-
There is a problem in the print engine. Contact
ror
your dealerl distributor.
PC
Page Size
(LaserJet Emulation Mode only.) The page size
Error
selected through the LaserJet Emulation Mode
Page Length command does not match the paper
cassette installed in the printer. This error code
flashes alternately with one of these codes for
the paper size requested: L (letter),
LL
(legal),
A4 (A4), b5 (85). Install the correct size paper
cassette or turn the printer off and back on again
and send the correct Page Length command.
PJ
Paper Jam
Paper jam. Refer to Section F.
PO
Paper Out
There is no paper in the paper cassette, the pa-
per cassette is not installed, or manual feed is
selected.
5-16
Maintenance and Troubleshooting
Advertisement
Table of Contents
