Table of Contents
Advertisement
A
Page Processing
Unlike conventional impact printers, your QMS laser printer
processes an entire page of text and/or graphics before
feeding a sheet of paper through the machine and printing
the accumulated image. During LaserJet emulation, the
following conditions will cause the current page to be fed
from the current paper source, printed and ejected into the
output tray:
1. You send the printer a form feed command;
2. The current print position advances off the end of the
page;
3.
You send the printer a Reset Printer command;
4. You send the printer an Orientation, Page Length, Page
Source command.
5.
[F0u manually eject the current page by pressing the
FORM FEED
I
key; or
6. The complexity of the current page causes your printer's
memory capacity to be exceeded.
Conditions (3) and (4) do not print pages on which nothing
has been printed and no vertical moves have occurred.
A.I
Memory Utilization
Your printer divides memory into a 180K-byte download
area for storing macros and downloaded fonts, and a 256K-
byte page description memory for buffering page images
(text and graphics).
The printer can hold up to 64 fonts (including resident
fonts) depending on the space available in memory. The
H-2
HP Emulation Mode
Advertisement
Table of Contents
