Table of Contents
Advertisement
• ALTERNATE ABSOLUTE VERTICAL TAB pro-
vides an alternate method nf moving down a specific
number of lines.
• NEGATIVE LINE FEED moves the current position
to the previous line without affecting the horizontal
position.
• NEGATIVE HALF LINE FEED moves the current
position halfway to the previous line without affect-
ing the horizontal position.
• POSITIVE HALF LINE FEED moves the current
position halfway to the next line.
• RELATIVE HORIZONTAL MOTION allows you to
move the current position in any horizontal direction.
• RELATIVE VERTICAL MOTION allows you to move
the current position in any vertical direction.
• AUTOMATIC LINE FEED "ON" causes the printer
to execute a line feed whenever a carriage return
«CR» is received.
• AUTOMATIC LINE FEED "OFF" disables the AU-
TOMATIC LINE FEED.
• BACKWARD PRINTING causes the printer to print
from right to left.
I
<ESC><BS>
I
BACKSPACE 1/120"
This command causes a backward (usually) movement of
1/120 inch.
If Backward Printing is "ON", the movement
will actually be forward or to the right.
Qume Emulation Mode
G-17
Advertisement
Table of Contents
