Table of Contents
Advertisement
printer.
• HORIZONTAL TAB «HT» moves the current po-
sition to the next horizontal tab stop.
• LINE FEED «LF» moves the current position down
one line without affecting the horizontal position.
• SPACE «SP» moves the current position one space
in the direction of printing.
• VERTICAL TAB «VT» moves the current position
to the next vertical tab stop.
• SHIFT-IN «SI» accesses the Primary Character Set.
• SHIFT-OUT «SO» accesses the Secondary Charac-
ter Set.
I
<BS>
I
BACKSPACE
This command (decimal
8)
will cause a backward (right
to left) movement of one print position. The width of
the print position is determined by the Horizontal Mo-
tion Index (HMI).
If
"Backward Printing" is on, the <BS>
command will actually move the print position from left
to right.
I
<CR>
I
CARRIAGE RETURN
This command (decimal 13) causes the print position to
move to the left margin. The <CR> command terminates
these Diablo features: Graphics Mode, Print Suppres-
sion, Automatic Margin Justification, Bold Print (does not
change the Current Font), and Shadow Print.
If you have enabled Group D Option 3, this command
will move the print position to the left margin and
down one line.
Diablo Emulation Mode
D-7
Advertisement
Table of Contents
