Supplementary Services; Ip Media Parameters - AudioCodes Mediant 4000 SBC User Manual

Hide thumbs Also See for Mediant 4000 SBC:
Table of Contents

Advertisement

Parameter
Malicious Signature Table
Malicious Signature
configure voip > sbc
malicious-signature-
database
[MaliciousSignatureDB]

55.11.1 Supplementary Services

The SBC and CRP supplementary services parameters are described in the table below.
Table 55-39: SBC and CRP Supplementary Services Parameters
Parameter
Emergency Call Preemption Parameters
For more information on SBC emergency call preemption, ''Configuring Call Preemption for SBC
Emergency Calls'' on page 509.
SBC Preemption Mode
configure voip > sbc settings >
sbc-preemption-mode
[SBCPreemptionMode]
Emergency Message Condition
configure voip > sbc settings >
sbc-emerg-condition
[SBCEmergencyCondition]
Emergency RTP DiffServ
configure voip > sbc settings >
sbc-emerg-rtp-diffserv
[SBCEmergencyRTPDiffServ]
Emergency Signaling DiffServ
configure voip > sbc settings >
sbc-emerg-sig-diffserv
[SBCEmergencySignalingDiffServ]

55.12 IP Media Parameters

The IP media parameters are described in the table below.
Parameter
IPMedia Detectors
User's Manual
Defines the malicious signature patterns
The format of the ini file table parameter is as follows:
[ MaliciousSignatureDB ]
FORMAT MaliciousSignatureDB_Index =
MaliciousSignatureDB_Name, MaliciousSignatureDB_Pattern;
[ \MaliciousSignatureDB ]
For a description of the table, see ''Configuring Malicious
Signatures'' on page 507.
Enables SBC emergency call preemption.
[0] Disable (default)
[1] Enable
Defines the index of the Message Condition rule in the Message
Conditions table that is used to identify emergency calls.
Note: The device applies the rule only after call classification
(but before inbound manipulation).
Defines DiffServ bits sent in the RTP for SBC emergency calls.
The valid value is 0 to 63. The default is 46.
Defines DiffServ bits sent in SIP signaling messages for SBC
emergency calls. This is included in the SIP Resource-Priority
header.
The valid value is 0 to 63. The default is 40.
Table 55-40: IP Media Parameters
Enables the device's DSP detectors for detection features such
812
Mediant 4000 SBC
Description
Description
Description
Document #: LTRT-41729

Advertisement

Table of Contents
loading

Table of Contents