AudioCodes Mediant 4000 SBC User Manual page 656

CDR Field
SrdId SRD ID and name
SIPInterfaceId SIP Interface ID
ProxySetId Proxy Set ID
IpProfileId IP Profile ID and name
MediaRealmId Media Realm ID and name
DirectMedia Direct media or traversing SBC:


SIP call termination reason (BYE, CANCEL,
SIPTrmReason
or SIP error codes, e.g., 404)
SipTermDesc Description of SIP termination reason:



Caller Name of caller
Callee Name of called party
Below shows an example of an SBC signaling CDR sent at the end of a call (call was
terminated normally):
User's Manual
Description
"yes"
"no"
SIP Reason header, if exists, for
example: SIP ;cause=200 ;text="Call
completed elsewhere".
If no SIP Reason header exists, the
description is taken from the reason text,
if exists, of the SIP response code, for
example: "417 Unknown Resource-
Priority".
If no reason text exists in the SIP
response code, the description is taken
from an internal SIP response mapping
mechanism. For example, if the device
receives a SIP response "422", it sends
in the CDR "422 Session Interval Too
Small method" as the description.
CDR Report Type
(SBCReportType)
All
All
All
All
All
All
"CALL_END"
"CALL_END"
All
All
656
Mediant 4000 SBC
Format
characters)
String (up to
29
characters)
String (up to
15
characters)
String (up to
15
characters)
String (up to
34
characters)
String (up to
55
characters)
String
String (up to
12
characters)
String (up to
26
characters)
String (up to
36
characters)
String (up to
36
characters)
Document #: LTRT-41729