Automatic Update For Mass Deployment - AudioCodes Mediant 4000 SBC User Manual

User's Manual
♦
3. Configure the device with the IP address of the DNS server for resolving the domain
names of the FTPS and HTTP servers:
[ InterfaceTable ]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingDevice;
InterfaceTable 0 = 6, 10, 10.15.7.95, 16, 10.15.0.1, 1,
"Voice", 80.179.52.100, 0.0.0.0, "vlan 1";
[ \InterfaceTable ]
4. Configure the device to perform the Automatic Update process daily at 03:00 (3 a.m):
•
ini File:
•
CLI:
39.2.10.3

Automatic Update for Mass Deployment

This example describes how to configure the Automatic Update feature for updating
multiple devices (i.e., mass deployment) using an HTTP provisioning server. In this
example, all the devices are configured to download the same "master" configuration file.
This file serves as the configuration template and instructs the devices which files to
download and how often to perform the Automatic Update process. In addition, the master
file also instructs each device to download an ini configuration file whose file name
contains the MAC address of the device.
The example scenario is as follows:

All devices download a "master" configuration file that contains the following:
•
Common configuration shared by all device's.
•
Specific configuration that instructs each device to download a specific
configuration file based on the device's MAC address, using the special string
"<MAC>" in the URL, as described in ''MAC Address Placeholder in Configuration
File Name'' on page 599.

Device queries the provisioning server daily at 24:00 (midnight) for software,
configuration and Auxiliary files.

HTTP-based provisioning server at www.company.com for storing the files.

DNS server at 80.179.52.100 for resolving the domain name of the provisioning
server.
Version 7.2
AutoCmpFileUrl =
'http://www.company.com/device/sw.cmp'
IniFileURL = 'http://www.company.com/device/inifile.ini'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# auto-firmware 'http://www.company.com/sw.cmp'
AutoUpdateFrequency = '03:00'
# configure system
(config-system)# automatic update
(automatic-update)# update-frequency 03:00
609
39. Automatic Provisioning
Mediant 4000 SBC