Refreshing The Ldap Cache - AudioCodes Mediant 4000 SBC User Manual

15.4.8.1 Refreshing the LDAP Cache

You can refresh values of LDAP Attributes associated with a specified LDAP search key
that are stored in the device's LDAP cache. The device sends an LDAP query to the LDAP
server for the cached Attributes of the specified search key and replaces the old values in
the cache with the new values received in the LDAP response.
For example, assume the cache contains a previously queried LDAP Attribute
"telephoneNumber=1004" whose associated Attributes include "displayName", "mobile"
and "ipPhone". If you perform a cache refresh based on the search key
"telephoneNumber=1004", the device sends an LDAP query to the server requesting
values for the "displayName", "mobile" and "ipPhone" Attributes of this search key. When
the device receives the LDAP response, it replaces the old values in the cache with the
new values received in the LDAP response.

To refresh the LDAP cache per LDAP Server Group:
1. Open the LDAP Settings page (Setup menu > IP Network tab > RADIUS & LDAP
folder > LDAP Settings).
2. Under the Cache Actions group, do the following:
a. From the 'LDAP Group Index' drop-down list, select the required LDAP Server
Group (see ''Configuring LDAP Server Groups'' on page 226).
User's Manual
Figure 15-29: LDAP Cache Refresh Flowchart
Figure 15-30: Refreshing LDAP Cache
238
Mediant 4000 SBC
Document #: LTRT-41729