Configuring Ldap Servers - AudioCodes Mediant 4000 SBC User Manual

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

Cache Entry Timeout

cache-entry-timeout

[LdapServersGroups_CacheEnt

Cache Entry Removal Timeout

cache-entry-removal-

[LdapServerGroups_CacheEntr

yRemovalTimeout]

15.4.4 Configuring LDAP Servers

The LDAP Servers table lets you configure up to four LDAP servers. The table defines the

address and connectivity settings of the LDAP server. The LDAP server can be configured

for SIP-related queries (e.g., routing and manipulation) or LDAP-based management user

The following procedure describes how to configure an LDAP server through the Web

interface. You can also configure it through ini file (LdapConfiguration) or CLI (configure

system > ldap ldap-configuration).

When you configure an LDAP server, you need to assign it an LDAP Server

Group. Therefore, before you can configure an LDAP server in the table, you must

first configure at least one LDAP Server Group in the LDAP Server Groups table (see

''Configuring LDAP Server Groups'' on page 226).

To configure an LDAP server:

Open the LDAP Servers table (Setup menu > IP Network tab > RADIUS & LDAP

folder > LDAP Servers).

User's Manual

time. For example, a search for the DN object record "JohnD" is

done at the same time in the "Marketing", "Sales" and

"Administration" DN objects.

Defines the duration (in minutes) that an entry in the device's LDAP

cache is valid. If the timeout expires, the cached entry is used only

if there is no connectivity with the LDAP server.

The valid range is 0 to 35791. The default is 1200. If set to 0, the

LDAP entry is always valid.

Defines the duration (in hours) after which the LDAP entry is

deleted from the device's LDAP cache.

The valid range is 0 to 596. The default is 0 (i.e., the entry is never

Mediant 4000 SBC

Document #: LTRT-41729