AudioCodes Mediant 4000 SBC User Manual page 274

3. Configure an EMS Service according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 15-23: EMS Services Table Parameter Descriptions
Parameter
Index
[EMSService_Index]
Name
service-name
[EMSService_ServiceName]
EMS Primary Server
primary-server
[EMSService_PrimaryServer]
EMS Secondary Server
secondary-server
[EMSService_SecondaryServer]
Listening Interface to devices
dev-login-int
[EMSService_DeviceLoginInterface]
Listening to EMS Interface
ems-int
[EMSService_EMSInterface]
User's Manual
Defines an index number for the new table row.
Note:

Each row must be configured with a unique index.

The parameter is mandatory.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 40 characters. By default, no
value is defined.
Note:

Each row must be configured with a unique name.

The parameter is mandatory.
Defines the address of the primary EMS server.
Note: The parameter is mandatory.
Defines the address of the secondary EMS server.
Assigns an HTTP Interface (local, listening HTTP
interface:port) for communication with the client. To configure
HTTP Interfaces, see ''Configuring HTTP Interfaces'' on page
268.
By default, no value is defined.
Note: The parameter is mandatory.
Assigns an HTTP Interface (local, listening HTTP
interface:port) for communication with the EMS. To configure
HTTP Interfaces, see ''Configuring HTTP Interfaces'' on page
268.
By default, no value is defined.
Note: The parameter is mandatory.
274
Mediant 4000 SBC
Description
Document #: LTRT-41729