Using Cli Shortcuts - AudioCodes Mediant 4000 SBC User Manual

The Enable mode groups the configuration commands under the following command
sets:
•
configure network: Contains IP network-related commands (e.g., interface and
dhcp-server):
# configure network
(config-network)#
•
configure voip: Contains voice-over-IP related commands (e.g., ip-group, sbc,
gateway, and media):
# configure voip
(config-voip)#
•
configure system: Contains system-related commands (e.g., clock, snmp
settings, and web):
# configure system
(config-system)#
•
configure troubleshoot: Contains logging-related commands (e.g., syslog,
logging and test-call):
# configure troubleshoot
(config-troubleshoot)#
7.1.2

Using CLI Shortcuts

The CLI provides several editing shortcut keys to help you configure your device more
easily, as listed in the table below.
Shortcut Key
Up arrow key
<Tab> key
? (question mark)
User's Manual
Table 7-1: CLI Editing Shortcut keys
Retypes the previously entered command. Continuing to press the Up
arrow key cycles through all commands entered, starting with the most
recent command.
Pressing the <Tab> key after entering a partial (but unique) command
automatically completes the command, displays it on the command prompt
line, and waits for further input.
Pressing the <Tab> key after entering a partial and not unique command
displays all completing options.

Displays a list of all subcommands in the current mode, for example:
(config-network)# ?
access-list
dhcp-server
configuration
dns
configuration
...

Displays a list of available commands beginning with certain letter(s),
for example:
(config-network)# d?
dhcp-server
configuration
dns
configuration

Displays syntax help for a specific command by entering the command,
a space, and then a question mark (?). This includes the range of valid
70
Description
Network access list
DHCP server
DNS
DHCP server
DNS
Document #: LTRT-41729
Mediant 4000 SBC