Auxiliary And Configuration File Name Parameters - AudioCodes Mediant 4000 SBC User Manual

Parameter
[SerialBaudRate]
[SerialData]
[SerialParity]
[SerialStop]
[SerialFlowControl]

55.1.7 Auxiliary and Configuration File Name Parameters

The table below lists the ini file parameters associated with the Auxiliary files. For more
information on Auxiliary files, see ''Loading Auxiliary Files'' on page 569.
Table 55-7: Auxiliary and Configuration File Parameters
Parameter
General Parameters
[SetDefaultOnIniFileProcess] Determines if all the device's parameters are set to their defaults
[SaveConfiguration]
User's Manual
parameters and view error/notification messages. To establish serial
communication with the device, see ''Establishing a CLI Session'' on
page 76.
Note: For the parameter to take effect, a device reset is required.
Defines the serial communication baud rate.
The valid values include the following: 1200, 2400, 9600, 14400, 19200,
38400, 57600, or 115200 (default).
Note: For the parameter to take effect, a device reset is required.
Defines the serial communication data bit.

[7] = 7-bit

[8] = (Default) 8-bit
Note: For the parameter to take effect, a device reset is required.
Defines the serial communication polarity.

[0] = (Default) None

[1] = Odd

[2] = Even
Note: For the parameter to take effect, a device reset is required.
Defines the serial communication stop bit.

[1] = (Default) 1-bit (default)

[2] = 2-bit
Note: For the parameter to take effect, a device reset is required.
Defines the serial communication flow control.

[0] = (Default) None

[1] = Hardware
Note: For the parameter to take effect, a device reset is required.
before processing the updated ini file.

[0] = Disable - parameters not included in the downloaded ini file
are not returned to default settings (i.e., retain their current
settings).

[1] = Enable (default).
Note: The parameter is applicable only for automatic HTTP update or
Web ini file upload (not applicable if the ini file is loaded using BootP).
Determines if the device's configuration (parameters and files) is
saved to flash (non-volatile memory).
726
Description
Description
Document #: LTRT-41729
Mediant 4000 SBC