Configuring The Time Zone - AudioCodes Mediant 4000 SBC User Manual

User's Manual
11.3

Configuring the Time Zone

You can configure the time zone in which the device is deployed. This is referred to as the
Coordinated Universal Time (UTC) time offset and defines how many hours the device is
from Greenwich Mean Time (GMT). For example, Germany Berlin is one hour ahead of
GMT (UTC/GMT is +1 hour) and therefore, you would configure the offset to "1". USA New
York is five hours behind GMT (UTC/GMT offset is -5 hours) and therefore, you would
configure the offset as a minus value "-5".

To configure the time zone:
1. Open the Time & Date page (Setup menu > Administration tab > Time & Date), and
then scroll down to the Time Zone group:
2. In the 'UTC Offset' fields (NTPServerUTCOffset), configure the time offset in relation
to the UTC. For example, if your region is GMT +1 (an hour ahead), enter "1" in the
'Hours' field.
3. Click Apply; the updated time is displayed in the 'UTC Time' read-only field and the
fields under the Local Time group.
Version 7.2
Figure 11-3: Configuring UTC Offset
113
11. Date and Time
Mediant 4000 SBC