AudioCodes Mediant 4000 SBC User Manual page 494

Parameter
d]
Suffix to Add
suffix-to-add
[IPOutboundManipulation_Suffix2Ad
d]
Privacy Restriction Mode
privacy-restriction-mode
[IPOutboundManipulation_PrivacyRe
strictionMode]
User's Manual
If you set the 'Manipulated Item' parameter to Source URI or
Destination URI, you can configure the parameter to a string
of up 49 characters. If you set the 'Manipulated Item'
parameter to Calling Name, you can configure the parameter
to a string of up 36 characters.
Defines the number or string to add at the end of the
manipulated item. For example, if you enter '01' and the user
name is "john", the new user name is "john01".
If you set the 'Manipulated Item' parameter to Source URI or
Destination URI, you can configure the parameter to a string
of up 49 characters. If you set the 'Manipulated Item'
parameter to Calling Name, you can configure the parameter
to a string of up 36 characters.
Determines user privacy handling (i.e., restricting source user
identity in outgoing SIP dialogs).

[0] Transparent = (Default) No intervention in SIP privacy.

[1] Don't change privacy = The user identity remains the
same as in the incoming SIP dialog. If a restricted number
exists, the restricted presentation is normalized as follows:

From URL header: anonymous@anonymous.invalid.

If a P-Asserted-Identity header exists (either in the
incoming SIP dialog or added by the device), a Privacy
header is added with the value "id".

[2] Restrict = The user identity is restricted (the restricted
presentation is as mentioned above).

[3] Remove Restriction = The device attempts to reveal the
user identity by setting user values in the From header and
removing the privacy "id" value if the Privacy header exists.
If the From header user is anonymous, the value is taken from
the P-Preferred-Identity, P-Asserted-Identity, or Remote-Party-
ID header (if exists).
The device identifies an incoming user as restricted if one of
the following exists:

From header user is anonymous.

P-Asserted-Identity and Privacy headers contain the value
"id".
Note: All restriction logic is performed after the user number
has been manipulated.
494
Mediant 4000 SBC
Description
Document #: LTRT-41729