AudioCodes Mediant 4000 SBC User Manual page 707

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

User's Manual

Batch Test Call Scenario: This example describes the configuration of a batch test

call setup for scheduled and continuous call testing of multiple endpoints. The test call

is done between two AudioCodes devices - Device A and Device B - with simulated

test endpoints. This eliminates the need for phone users, who would otherwise need

to answer and end calls many times for batch testing. The calls are initiated from

Device A, where Device B serves as the remote answering endpoint.

Test Call Rules table configuration at Device A:

Test Call Rules table configuration at Device B:

Figure 52-7: Batch Test Call Example

Endpoint URI: "101"

Called URI: "201"

Route By: Dest Address

Destination Address: "10.13.4.12"

SIP Interface: SIPInterface_0

Call Party: Caller

Maximum Channels for Session: "3" (configures three endpoints - "101",

"102" and "103)

Call Duration: "5" (seconds)

Calls per Sec: "1"

Test Mode: Continuous

Test Duration: "3" (minutes)

Schedule Interval: "180" (minutes)

Endpoint URI: "201"

Maximum Channels for Session: "3" (configures three endpoints - "201",

"202" and "203)

52. Testing SIP Signaling Calls

Mediant 4000 SBC