High Availability Maintenance; Initiating An Ha Switchover; Resetting The Redundant Unit - AudioCodes Mediant 4000 SBC User Manual

Hide thumbs Also See for Mediant 4000 SBC:
Table of Contents

Advertisement

User's Manual
35

High Availability Maintenance

This section describes various maintenance procedures when the device operates in the
High Availability mode.
35.1

Initiating an HA Switchover

You can initiate a switchover from the Active to Redundant device.
Note:
unavailable.
To perform a switch-over:
1.
Open the High Availability Maintenance page:
Toolbar: Click the Actions button, and then from the drop-down menu, choose
Switchover.
Navigation tree: Setup menu > Administration tab > Maintenance folder > High
Availability Maintenance.
2.
Click Switch Over; a confirmation box appears requesting you to confirm.
3.
Click OK.
35.2

Resetting the Redundant Unit

You can reset the Redundant device, if necessary.
Note:
unavailable.
To reset the Redundant device:
1.
Open the High Availability Maintenance page:
Toolbar: Click the Actions button, and then from the drop-down menu, choose
Switchover.
Version 7.2
When performing an HA switchover, the HA mode becomes temporarily
Figure 35-1: Performing a Device HA Switchover
When resetting the Redundant device, the HA mode becomes temporarily
35. High Availability Maintenance
565
Mediant 4000 SBC

Advertisement

Table of Contents
loading

Table of Contents