Table 40-8: Sip Supplementary Services Settings - AudioCodes Mediant 8000 Installation, Operation & Maintenance Manual

Parameter Name
Behavior 3xx
Enable Semi
Attended Transfer
Wait For Busy Time
Transfer Prefix
Trunk Transfer
Mode
Installation & Operation Manual

Table 40-8: SIP Supplementary Services Settings

Type
Enum
Forward, Redirect
Enum
Disable, Enable
Integer
0 – 20000000
String
Up to 9 chars
Enum
None, CAS NFA, ISDN,
CAS Normal, QSIG
IP2TelBlindTransfer,
4ESSFreeOOBBlindTransfer
Provisioning
Type
Instant Defines the gateways behavior
when a 3xx response is
received for an outgoing INVITE
request. The gateway can either
use the same call identifiers
(CallID, branch, to and from
tags) or change them in the new
initiated INVITE.


Instant Defines the gateway behavior
when Transfer is initiated while
still in Alerting state.


Instant Defines the time to wait to
detect busy and reorder tones.
Currently used in semi-
supervised PBX transfer.
Instant Defines the string that is added
as a prefix to the transferred /
forwarded called number when
the REFER / 3xx message is
received. This parameter can be
used to apply different
Operation rules to differentiate
transferred number from the
originally dialed number.
Instant Defines the type type of transfer
the PSTN/PBX supports.


582
Mediant 8000
Description
Forward – Use different call
identifiers for a redirected
INVITE message.
Redirect – Use the same call
identifiers.
Disable – Send REFER with
Replaces (default).
Enable – Send CANCEL and
after a 487 response is
received, send REFER
without Replaces.
None – Not supported
(default).
CAS NFA – Supports CAS
NFA DMS-100 transfer.
Document # LTRT-92224