AudioCodes Mediant 4000 SBC User Manual page 453

User's Manual
Parameter
[SBCAdmissionControl_Index] Note: Each row must be configured with a unique index.
Name
admission-name
[SBCAdmissionControl_Admis
sionControlName]
Limit Type
limit-type
[SBCAdmissionControl_LimitT
ype]
IP Group
ip-group-name
[SBCAdmissionControl_IPGro
upName]
SIP Interface
sip-interface-name
[SBCAdmissionControl_SIPInt
erfaceName]
Request Type
request-type
[SBCAdmissionControl_Requ
estType]
Request Direction
request-direction
[SBCAdmissionControl_Requ
estDirection]
Limit
Reserved Capacity
reservation
[SBCAdmissionControl_Reser
vation]
Version 7.2
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters. By default, no value
is defined.
Defines the entity to which the rule applies.

[0] IP Group (default)

[1] SRD

[2] SIP Interface
Assigns an IP Group to the rule if the rule is applied to an IP Group.
By default, no value is defined. For all IP Groups, configure the
parameter to Any.
Note: The parameter is applicable only if 'Limit Type' is configured to
IP Group.
Assigns a SIP Interface to the rule if the rule is applied to a SIP
Interface.
By default, no value is defined. For all SIP Interfaces, configure the
parameter to Any.
Note: The parameter is applicable only if 'Limit Type' is configured to
SIP Interface.
Defines the SIP dialog-initiating request type to which you want to
apply the rule (not the subsequent requests that can be of different
type and direction).

[0] All = (Default) Includes the total number of all dialogs.

[1] INVITE

[2] SUBSCRIBE

[3] Other = All SIP request types except INVITEs and
SUBSCRIBEs (e.g., REGISTER).
Defines the call direction of the SIP request to which the rule applies.

[0] Both = (Default) Rule applies to inbound and outbound SIP
dialogs.

[1] Inbound = Rule applies only to inbound SIP dialogs.

[2] Outbound = Rule applies only to outbound SIP dialogs.
Defines the guaranteed (minimum) call capacity.
The default is 0 (i.e., no reserved capacity).
Note:

Reserved call capacity is applicable only to IP Groups and SRDs
(i.e., 'Limit Type' parameter configured to IP Group or SRD). If
you configure the 'Limit Type' parameter to SIP Interface, leave
the 'Reserved Capacity' parameter at its' default (i.e., 0).

Reserved call capacity is applicable only to INVITE and
SUBSCRIBE messages.

Reserved call capacity must be less than the maximum capacity
(limit) configured for the CAC rule (see the 'Limit' parameter
below).
453
23. Configuring Admission Control
Description
Mediant 4000 SBC