AudioCodes Mediant 4000 SBC User Manual page 36

(config-network)# interface network-if 0
9. Configure the IP address:
(network-if-0)# ip-address <IP address>
10. Configure the prefix length:
(network-if-0)# prefix-length <prefix length / subnet mask, e.g., 16>
11. Configure the Default Gateway address:
(network-if-0)# gateway <IP address>
12. Exit the IP Interfaces table:
(network-if-0)# exit
13. Exit the Network configuration mode:
(config-network)# exit
14. Reset the device with a flash burn:
# reload now
15. Cable the device to your network. You can now access the device's management
interface using this new OAMP IP address.
User's Manual 36
Mediant 4000 SBC
Document #: LTRT-41729