Coders And Profile Parameters - AudioCodes Mediant 4000 SBC User Manual

Parameter
configure voip > sip-
definition settings >
message-policy-reject-
response-type
[MessagePolicyRejectRe
sponseType]
55.9

Coders and Profile Parameters

The profile parameters are described in the table below.
Parameter
Coder Groups Table
Coder Groups
configure voip > coders-
and-profiles audio-coders-
groups
[AudioCodersGroups]
[AudioCoders]
IP Profiles Table
IP Profiles
configure voip > coders-
and-profiles ip-profile
[IPProfile]
User's Manual
MessagePolicy_MaxBodyLength, MessagePolicy_MaxNumHeaders,
MessagePolicy_MaxNumBodies, MessagePolicy_SendRejection,
MessagePolicy_MethodList, MessagePolicy_MethodListType,
MessagePolicy_BodyList, MessagePolicy_BodyListType,
MessagePolicy_UseMaliciousSignatureDB;
[/MessagePolicy]
For a detailed description of the table, see Configuring SIP Message
Policy Rules.
Defines the SIP response code that the device sends when it rejects an
incoming SIP message due to a matched Message Policy in the Message
Policies table, whose 'Send Reject' (MessagePolicy_SendRejection)
parameter is configured to Policy Reject [0].
The default is 400 "Bad Request".
To configure Message Policies, see Configuring SIP Message Policy
Rules.
Table 55-33: Profile Parameters
Defines the device's coders. Each group can consist of up to 10 coders.
The first Coder Group is the default coder list and the default Coder
Group.
The format of the ini file table parameter is as follows:
[ AudioCodersGroups ]
FORMAT AudioCodersGroups_Index = AudioCodersGroups_Name;
[ \AudioCodersGroups ]
[ AudioCoders ]
FORMAT AudioCoders_Index = AudioCoders_AudioCodersGroupId,
AudioCoders_AudioCodersIndex, AudioCoders_Name,
AudioCoders_pTime, AudioCoders_rate, AudioCoders_PayloadType,
AudioCoders_Sce, AudioCoders_CoderSpecific;
[ \AudioCoders ]
Note: For a list of supported coders and for configuring Coder Groups,
see ''Configuring Coder Groups'' on page 375.
Defines the IP Profiles table. The format of the ini file table parameter is
as follows:
[IPProfile]
FORMAT IpProfile_Index = IpProfile_ProfileName,
IpProfile_IpPreference, IpProfile_CodersGroupName,
IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay,
IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ,
IpProfile_SigIPDiffServ, IpProfile_SCE, IpProfile_RTPRedundancyDepth,
IpProfile_RemoteBaseUDPPort, IpProfile_CNGmode,
IpProfile_VxxTransportType, IpProfile_NSEMode,
786
Description
Description
Document #: LTRT-41729
Mediant 4000 SBC