AudioCodes Mediant 4000 SBC User Manual page 491

User's Manual
Parameter
Additional Manipulation
is-additional-manipulation
[IPOutboundManipulation_IsAddition
alManipulation]
Call Trigger
trigger
[IPOutboundManipulation_Trigger]
Match
Request Type
request-type
[IPOutboundManipulation_RequestT
ype]
Source IP Group
src-ip-group-name
[IPOutboundManipulation_SrcIPGro
upName]
Destination IP Group
dst-ip-group-name
[IPOutboundManipulation_DestIPGr
oupName]
Source Username Prefix
src-user-name-prefix
[IPOutboundManipulation_SrcUsern
amePrefix]
Version 7.2
Determines whether additional manipulation is done for the
table entry rule listed directly above it.

[0] No = (Default) Regular manipulation rule - not done in
addition to the rule above it.

[1] Yes = If the previous table row entry rule matched the
call, consider this row entry as a match as well and perform
the manipulation specified by this rule.
Note: Additional manipulation can only be done on a different
item (source URI, destination URI, or calling name) to the rule
configured in the row above (configured by the 'Manipulated
URI' parameter).
Defines the reason (i.e., trigger) for the re-routing of the SIP
request:

[0] Any = (Default) Re-routed for all scenarios (re-routes
and non-re-routes).

[1] 3xx = Re-routed if it triggered as a result of a SIP 3xx
response.

[2] REFER = Re-routed if it triggered as a result of a
REFER request.

[3] 3xx or REFER = Applies to options [1] and [2].

[4] Initial only = Regular requests that the device forwards
to a destination. In other words, re-routing of requests
triggered by the receipt of REFER or 3xx does not apply.
Defines the SIP request type to which the manipulation rule is
applied.

[0] All = (Default) all SIP messages.

[1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.

[2] REGISTER = Only SIP REGISTER messages.

[3] SUBSCRIBE = Only SIP SUBSCRIBE messages.

[4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
Defines the IP Group from where the INVITE is received.
The default value is Any (i.e., any IP Group).
Defines the IP Group to where the INVITE is to be sent.
The default value is Any (i.e., any IP Group).
Defines the prefix of the source SIP URI user name, typically
used in the SIP From header.
The default value is the asterisk (*) symbol (i.e., any source
username prefix). The prefix can be a single digit or a range of
491
25. SBC Manipulations
Description
Mediant 4000 SBC