AudioCodes Mediant 4000 SBC User Manual page 262

Table 15-19: HTTP Remote Hosts Table Parameter Descriptions
Parameter
Index
rest-servers
[HTTPRemoteHosts_RemoteHostindex]
Name
[HTTPRemoteHosts_Name]
Address
rest-address
[HTTPRemoteHosts_Address]
Port
rest-port
[HTTPRemoteHosts_Port]
Interface
rest-interface
[HTTPRemoteHosts_Interface]
Transport Type
rest-transport-type
[HTTPRemoteHosts_HTTPTransportType]
User's Manual
Description
Defines an index number for the new table row.
Note:

Each row must be configured with a unique index.

The parameter is mandatory.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 40 characters. By
default, no value is defined.
Note:

Each row must be configured with a unique name.

The parameter is mandatory.
Defines the address (IP address or FQDN) of the remote
host.
The valid value is a string of up to 80 characters.
Note:

An IPv6 address can only be configured if the
interface is a CONTROL type.

If the address is an FQDN and the DNS resolution
results in multiple IP addresses, the device device
attempts to establish multiple connections (sessions)
for each IP address. Only the first 10 resolved IP
addresses are used regardless of the number of
hosts.

FQDN resolution is also performed (immediately)
when connection is subsequently "closed" (by timeout
or by the remote host) and connections are updated
accordingly. In addition, the device periodically (every
15 minutes) performs DNS name resolution to ensure
that the list of resolved IP addresses has not
changed. If a change is detected, the device updates
its' list of IP addresses and re-establishes
connections accordingly.

In addition to multiple HTTP sessions, the device
establishes multiple (TCP) connections per session,
thereby enhancing data exchange capabilities with
the host.
Defines the port of the host.
The valid value is 0 to 65535. The default is 80.
Assigns one of the device's IP network interfaces
through which communication with the remote host is
done.
By default, no value is defined and the OAMP interface
is used.
Defines the protocol for communicating with the remote
host:

[0] HTTP (default)

[1] HTTPS
262
Mediant 4000 SBC
Document #: LTRT-41729