Installing The License Key; Installing License Key Through Web Interface - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Warning:
5. Install the License Key on the device, as described in ''Installing the License Key'' on
page 583.

37.2.3 Installing the License Key

After you have received your License Key file from your AudioCodes representative, you
can install it on the device as described in this section.
Note:
flash memory and overwrites the previously installed License Key.

37.2.3.1 Installing License Key through Web Interface

The following procedure describes how to install the License Key through the Web
interface.

To install the License Key through the Web interface:
1. Open the License Key page (Setup menu > Administration tab > Maintenance
folder > License Key).
2. Back up the License Key currently installed on the device, as a precaution. If the new
License Key does not comply with your requirements, you can re-load th backup to
restore the device's original capabilities.
a. In the 'Current License Key' field, select the entire text string and copy it to any
standard text file (e.g., Notepad):
b. Save the text file with any file name and file extension (e.g., key.txt) to a folder on
your computer.
3. Depending on whether you are loading a License Key file with a single License Key
(i.e., one "S/N") or with multiple License Keys (i.e., more than one "S/N"), do one of
the following:
•
Loading a File with Multiple License Keys:
a.
Version 7.2
Do not modify the contents of the License Key file.
When you install a new License Key, it is loaded to the device's non-volatile
Figure 37-5: Copying License Key
Under the "Load License Key file ..." text, click the Browse button, and then
navigate to and select the License Key file on your computer.
583
37. Software Upgrade
Mediant 4000 SBC