Call Setup Rule Examples - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Parameter
action-value
[CallSetupRules_ActionValue]

18.5.1 Call Setup Rule Examples

Below are configuration examples for using Call Setup Rules.

Example 1: This example configures the device to replace (manipulate) the incoming
call's source number with a number retrieved from the AD by an LDAP query. The
device queries the AD server for the attribute record, "telephoneNumber" whose value
is the same as the received source number (e.g., "telephoneNumber =4064"). If such
an attribute is found, the device retrieves the number of the attribute record,
"alternateNumber" and uses this number as the source number.
•
Call Setup Rules table configuration:
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
•
Routing table configuration: A single routing rule is assigned the Call Setup
Rule Set ID.
♦

Example 2: This example configures the device to replace (manipulate) the incoming
call's calling name (caller ID) with a name retrieved from the AD by an LDAP query.
The device queries the AD server for the attribute record, "telephoneNumber" whose
value is the same as the received source number (e.g., "telephoneNumber =5098"). If
such an attribute is found, the device retrieves the name from the attribute record,
"displayName" and uses this as the calling name in the incoming call.
•
Call Setup Rules table configuration:
♦
♦
♦
♦
♦
Version 7.2
The valid value is a string of up to 300 characters (case-
insensitive).
Examples:

'+9723976'+ldap.attr.alternateNumber

'9764000'

srctags

ldap.attr.displayName

true (if the 'Action Type' is set to Exit)

false (if the 'Action Type' is set to Exit)
'Rules Set ID': 1
'Query Type': LDAP
'Query Target': LDAP-DC-CORP
'Search Key': 'telephoneNumber=' + param.call.src.user
'Attributes to Get': alternateNumber
'Row Role': Use Current Condition
'Condition': ldap.attr. alternateNumber exists
'Action Subject': param.call.src.user
'Action Type': Modify
'Action Value': ldap.attr. alternateNumber
Index 1:

'Call Setup Rules Set ID': 1
'Rules Set ID': 2
'Query Type': LDAP
'Query Target': LDAP-DC-CORP
'Search Key': 'telephoneNumber=' + param.call.src.user
'Attributes to Get': displayName
Description
371
18. SIP Definitions
Mediant 4000 SBC