AudioCodes Mediant 4000 SBC User Manual page 730

Parameter
Software/Configuration File URL Path for Automatic Update Parameters
CLI path: configure system > automatic-update
firmware
[CmpFileURL]
voice-configuration
[IniFileURL]
cli-script <URL>
[AUPDCliScriptURL]
prerecorded-tones
[PrtFileURL]
call-progress-tones
[CptFileURL]
User's Manual
Note: If you use the parameter in an ini file for periodic automatic
provisioning with non-HTTP (e.g., TFTP) and without CRC, the device
resets upon every file download.
Defines the name of the cmp file and the URL address (IP address or
FQDN) of the server on which the file is located.
For example: http://192.168.0.1/filename
Note:

For the parameter to take effect, a device reset is required.

When the parameter is configured, the device always loads the
cmp file after it is reset.

The cmp file is validated before it's burned to flash. The checksum
of the cmp file is also compared to the previously burnt checksum
to avoid unnecessary resets.

The maximum length of the URL address is 255 characters.
Defines the name of the ini file and the URL address (IP address or
FQDN) of the server on which the file is located.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config_<MAC>.ini
https://<username>:<password>@<IP address>/<file name>
Note:

For the parameter to take effect, a device reset is required.

When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently dated ini files are loaded.

The case-sensitive string, "<MAC>" can be used in the file name
for instructing the device to replace it with the device's MAC
address. For more information, see ''MAC Address Placeholder in
Configuration File Name'' on page 599. This option allows the
loading of specific configurations for specific devices.

The maximum length of the URL address is 99 characters.
Defines the URL of the server where the CLI Script file containing the
device's configuration is located. This file is used for automatic
provisioning.
Note: The case-sensitive string, "<MAC>" can be used in the file
name for instructing the device to replace it with the device's MAC
address. For more information, see MAC Address Placeholder in
Configuration File Name on page 599.
Defines the name of the Prerecorded Tones (PRT) file and the URL
address (IP address or FQDN) of the server on which the file is
located.
For example: http://server_name/file, https://server_name/file
Note: The maximum length of the URL address is 99 characters.
Defines the name of the CPT file and the URL address (IP address or
FQDN) of the server on which the file is located.
For example: http://server_name/file, https://server_name/file
Note: The maximum length of the URL address is 99 characters.
730
Mediant 4000 SBC
Description
Document #: LTRT-41729