Triggers For Automatic Update - AudioCodes Mediant 4000 SBC User Manual

User's Manual
File Type
CLI Script file
CMP file based on timestamp
User Info file
CMP file
Feature Key file
Call Progress Tone (CPT) file
Prerecorded Tones (PRT) file
Dial Plan file
Answering Machine Detection (AMD)
file
SSL/TLS Private Key file
SSL/TLS Root Certificate file
SSL/TLS Certificate file

39.2.5 Triggers for Automatic Update

The Automatic Update feature can be triggered by the following:

Upon device startup (reset or power up). To disable this trigger, run the following CLI
command:
(config-system)# automatic-update
(automatic-update)# run-on-reboot off

Periodically:
•
Specified time of day (e.g., 18:00), configured by the ini file parameter
AutoUpdatePredefinedTime or CLI command configure system > automatic-
update > predefined-time.
•
Interval between Automatic Updates (e.g., every 60 minutes), configured by the
ini file parameter AutoUpdateFrequency or CLI command configure system >
automatic-update > update-frequency.

Centralized provisioning server request:
•
Upon receipt of an SNMP request from the provisioning server.
•
Upon receipt of a special SIP NOTIFY message from the provisioning server. The
NOTIFY message includes an Event header with the AudioCodes proprietary
value, "check-sync;reboot=false", as shown in the example below:
NOTIFY sip:<user>@<dsthost> SIP/2.0
To: sip:<user>@<dsthost>
From: sip:sipsak@<srchost>
Version 7.2
Keywords for
Template File
cli cliScript.txt
acmp autoFirmware.cmp
usrinf userInfo.txt
cmp firmware.cmp
fk fk.ini
cpt cpt.dat
prt prt.dat
dpln dialPlan.dat
amd amd.dat
sslp pkey.pem
pkey<ID>.pem (for multi-certificate
system)
sslr root.pem
root<ID>.pem (for multi-certificate
system)
sslc cert.pem
cert<ID>.pem (for multi-certificate
system)
601
39. Automatic Provisioning
Value Replacing
<FILE> Placeholder
Mediant 4000 SBC