Enabling Sip-Based Media Recording; Configuring Sip Recording Rules - AudioCodes Mediant 4000 SBC User Manual

User's Manual
</stream>
<stream id="00000000-0000-0000-0000-BF583A36C4E3" session="0000-
0000-0000-0000-00000000d0d71a52">
<label>2</label>
</stream>
</recording>
--boundary_ac1fffff85b—

15.2.1 Enabling SIP-based Media Recording

The following procedure describes how to enable the SIP-based media Recording feature.

To enable SIP-based media recording:
1. Open the SIP Recording Settings page (Setup menu > Signaling & Media tab > SIP
Recording folder > SIP Recording Settings).
2. From the 'SIP Recording Application' drop-down list, select Enable.
3. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.

15.2.2 Configuring SIP Recording Rules

The SIP Recording Rules table lets you configure up to 30 SIP-based media recording
rules. A SIP Recording rule defines call routes that you want to record. For an overview of
the feature, see ''SIP-based Media Recording'' on page 209.
The following procedure describes how to configure SIP Recording rules through the Web
interface. You can also configure it through ini file (SIPRecRouting) or CLI (configure voip >
sip-definition sip-recording sip-rec-routing).

To configure a SIP Recording Routing rule:
1. Open the SIP Recording Rules table (Setup menu > Signaling & Media tab > SIP
Recording folder > SIP Recording Rules).
2. Click New; the following dialog box appears:
Figure 15-8: SIP Recording Rules Table - Add Dialog Box
Version 7.2
Figure 15-7: Enabling SIPRec
213
15. Services
Mediant 4000 SBC