AudioCodes Mediant 4000 SBC User Manual page 291

User's Manual

Alternative routing based on measured metrics. If a call is rejected because of a
crossed threshold, the device generates a SIP 806 response. You can configure this
SIP response code as a reason for alternative routing (see ''Configuring SIP
Response Codes for Alternative Routing Reasons'' on page 476).
Note:
Experience Profiles. One of these pre-configured profiles is the default Quality of
Experience Profile, which is used if you do not configure a Quality of Experience
Profile.
The following procedure describes how to configure Quality of Experience Profiles through
the Web interface. You can also configure it through other management platforms:

Quality of Experience Profile table: ini file (QoEProfile) or CLI (configure voip > qoe
qoe-profile)

Quality of Experience Color Rules table: ini file (QOEColorRules) or CLI (configure
voip > qoe qoe-profile qoe-color-rules)

To configure a QoE Profile:
1. Open the Quality of Experience Profile table (Setup menu > Signaling & Media tab >
Media folder > Quality of Experience > Quality of Experience Profile).
2. Click New; the following dialog box appears:
Figure 16-3: Quality of Experience Profile Table - Dialog Box
3. Configure a QoE Profile according to the parameters described in the table below.
4. Click Apply.
Table 16-2: Quality of Experience Profile Table Parameter Descriptions
Parameter
Index
[QOEProfile_Index]
Profile Name
name
[QOEProfile_Name]
Sensitivity Level
sensitivity-level
Version 7.2
For your convenience, the device provides pre-configured Quality of
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters.
Defines the pre-configured threshold profile to use.

[0] User Defined = Need to define thresholds per monitored
parameter in the Quality of Experience Color Rules table.
Description
291
16. Quality of Experience
Mediant 4000 SBC