AudioCodes Mediant 4000 SBC User Manual page 814

Parameter
AGC Redirection
configure voip > media ipmedia >
agc-redirection
[AGCRedirection]
AGC Target Energy
configure voip > media ipmedia >
agc-target-energy
[AGCTargetEnergy]
AGC Minimum Gain
configure voip > media ipmedia >
agc-min-gain
[AGCMinGain]
AGC Maximum Gain
configure voip > media ipmedia >
agc-max-gain
[AGCMaxGain]
Disable Fast Adaptation
configure voip > media ipmedia >
agc-disable-fast-adaptation
[AGCDisableFastAdaptation]
Answering Machine Detector (AMD) Parameters
For more information on AMD, see ''Answering Machine Detection (AMD)'' on page 191.
Answer Machine Detector
Sensitivity Parameter Suite
configure voip > media
ipmedia > amd-sensitivity-
parameter-suit
[AMDSensitivityParameterSuit]
User's Manual

[15] 15 = 6.00 dB/sec

[16] 16 = 7.00 dB/sec

[17] 17 = 8.00 dB/sec

[18] 18 = 9.00 dB/sec

[19] 19 = 10.00 dB/sec

[20] 20 = 11.00 dB/sec

[21] 21 = 12.00 dB/sec

[22] 22 = 13.00 dB/sec

[23] 23 = 14.00 dB/sec

[24] 24 = 15.00 dB/sec

[25] 25 = 20.00 dB/sec

[26] 26 = 25.00 dB/sec

[27] 27 = 30.00 dB/sec

[28] 28 = 35.00 dB/sec

[29] 29 = 40.00 dB/sec

[30] 30 = 50.00 dB/sec

[31] 31 = 70.00 dB/sec
Determines the AGC direction.

[0] 0 = (Default) AGC works on signals from the TDM side.

[1] 1 = AGC works on signals from the IP side.
Defines the signal energy value (dBm) that the AGC attempts
to attain.
The valid range is 0 to -63 dBm. The default is -19 dBm.
Defines the minimum gain (in dB) by the AGC when activated.
The range is 0 to -31. The default is -20.
Note: For the parameter to take effect, a device reset is
required.
Defines the maximum gain (in dB) by the AGC when activated.
The range is 0 to 18. The default is 15.
Note: For the parameter to take effect, a device reset is
required.
Enables the AGC Fast Adaptation mode.

[0] = Disable (default)

[1] = Enable
Note: For the parameter to take effect, a device reset is
required.
Global parameter that defines the AMD Parameter Suite to use.
You can also configure this functionality per specific calls, using
IP Profiles (IpProfile_AMDSensitivityParameterSuit). For a
detailed description of the parameter and for configuring this
functionality in the IP Profiles table, see ''Configuring IP
Profiles'' on page 384.
814
Mediant 4000 SBC
Description
Document #: LTRT-41729