AudioCodes Mediant 4000 SBC User Manual page 762

Parameter
Accounts Table
Accounts
configure voip > sip-definition
account
[Account]
Proxy Registration Parameters
Proxy Name
configure voip > sip-definition
proxy-and-registration > proxy-
name
[ProxyName]
Use Proxy IP as Host
configure voip > sip-definition
settings > use-proxy-ip-as-host
[UseProxyIPasHost]
User's Manual
IPGroup_RegistrationMode, IPGroup_AuthenticationMode,
IPGroup_MethodList, IPGroup_EnableSBCClientForking,
IPGroup_SourceUriInput, IPGroup_DestUriInput,
IPGroup_ContactName, IPGroup_Username,
IPGroup_Password, IPGroup_UUIFormat, IPGroup_QOEProfile,
IPGroup_BWProfile, IPGroup_AlwaysUseSourceAddr,
IPGroup_MsgManUserDef1, IPGroup_MsgManUserDef2,
IPGroup_SIPConnect, IPGroup_SBCPSAPMode,
IPGroup_DTLSContext, IPGroup_CreatedByRoutingServer,
IPGroup_UsedByRoutingServer, IPGroup_SBCOperationMode,
IPGroup_SBCRouteUsingRequestURIPort,
IPGroup_SBCKeepOriginalCallID, IPGroup_TopologyLocation,
IPGroup_SBCDialPlanName;
[/IPGroup]
For a description of the table, see ''Configuring IP Groups'' on
page 326.
Note: For the parameter to take effect, a device reset is required.
Defines user accounts for registering and/or authenticating
(digest) IP Groups (e.g., an IP-PBX) with a Serving IP Group
(e.g., a registrar server).
The format of the ini file table parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroupName, Account_ServingIPGroupName,
Account_Username, Account_Password, Account_HostName,
Account_Register, Account_ContactUser,
Account_ApplicationType;
[\Account]
For a detailed description of the table, see ''Configuring
Registration Accounts'' on page 351.
Defines the Home Proxy domain name. If specified, this name is
used as the Request-URI in REGISTER, INVITE and other SIP
messages, and as the host part of the To header in INVITE
messages. If not specified, the Proxy IP address is used instead.
The valid value is a string of up to 49 characters.
Note: The parameter functions together with the
UseProxyIPasHost parameter.
Enables the use of the proxy server's IP address (in dotted-
decimal notation) as the host name in SIP From and To headers
in REGISTER requests.

[0] Disable (default)

[1] Enable
If the parameter is disabled and the device registers to an IP
Group (i.e., proxy server), it uses the string configured by the
ProxyName parameter as the host name in the REGISTER's
Request-URI and uses the string configured by the IP Groups
table parameter, SIPGroupName as the host name in the To and
From headers. If the IP Group is configured with a Proxy Set that
has multiple IP addresses, all the REGISTER messages sent to
762
Mediant 4000 SBC
Description
Document #: LTRT-41729