AudioCodes Mediant 4000 SBC User Manual page 306

3. Click New; the following dialog box appears:
Figure 17-3: Remote Media Subnet Table - Add Dialog Box
4. Configure the Remote Media Subnet according to the parameters described in the
table below.
5. Click Apply.
Table 17-2: Remote Media Subnet Table Parameter Descriptions
Parameter
Index
[RemoteMediaSubnet_RemoteMediaSubnetIndex]
Name
name
[RemoteMediaSubnet_RemoteMediaSubnetName]
Prefix Length
prefix-length
[RemoteMediaSubnet_PrefixLength]
Address Family
address-family
[RemoteMediaSubnet_AddressFamily]
Destination IP
dst-ip-address
[RemoteMediaSubnet_DstIPAddress]
QoE Profile
qoe-profile
[RemoteMediaSubnet_QOEProfileName]
User's Manual
Description
Defines an index number for the new table row.
Note: Each row must be configured with a
unique index.
Defines an arbitrary name to easily identify the
row.
The valid value is a string of up to 20 characters.
Note: Each row must be configured with a
unique name.
Defines the subnet mask in Classless Inter-
Domain Routing (CIDR) notation. For example,
16 denotes 255.255.0.0.
The default is 16.
Defines the IP address protocol.

[2] IPv4 (default)

[10] IPv6
Defines the IP address of the destination.
The default is 0.0.0.0.
Assigns a Quality of Experience Profile to the
Remote Media Subnet.
By default, no value is defined.
To configure QoE Profiles, see ''Configuring
306
Mediant 4000 SBC
Document #: LTRT-41729