AudioCodes Mediant 4000 SBC User Manual page 44

Item #
1 Company logo.
2 Menu bar containing the menus.
3 Toolbar providing frequently required command buttons.

Save: Saves configuration changes to the device's flash memory (without
resetting the device). If you make a configuration change, the button is
surrounded by a red-colored border as a reminder to save your settings to flash
memory, by clicking the button.

Reset: Opens the Maintenance Actions page, which is used for performing
various maintenance procedures such as resetting the device (see ''Basic
Maintenance'' on page 561). If you make a configuration change that takes effect
only after a device reset, the button is surrounded by a red-colored border as a
reminder to save your settings to flash memory with a device reset; otherwise,
your changes revert to previous settings if the device subsequently resets or
powers off.

Actions:





4 Alarm bell icon, which displays the number of active alarms generated by the device.
The color of the number of alarms display indicates the highest severity of an active
alarm. If you click the icon, the Active Alarms table is displayed. For more information
on the table, see Viewing Active Alarms.
5 Button displaying the username of the currently logged in user. If you click the button,
information of the logged-in user is displayed (see ''Viewing Logged-In User
Information'' on page 63) and the Log Out button is provided to log out the Web
session (see ''Logging Off the Web Interface'' on page 58).
6 Tab bar containing tabs pertaining to the selected menu:

Setup menu:




Monitor menu: Monitor

Troubleshoot menu: Troubleshoot
7 Back and Forward buttons that enable quick-and-easy navigation through previously
opened pages. This is especially useful when you find that you need to return to a
previously accessed page, and then need to go back to the page you just left.


The button is available only if you have used the Back button.
User's Manual
Configuration File: Opens the Configuration File page, which is used for
saving the ini file to a folder on your PC, or for loading an ini file to the device
(see ''Backing Up and Loading Configuration File'' on page 593).
Auxiliary Files: Opens the Auxiliary Files page, which is used for loading
Auxiliary files to the device (see ''Loading Auxiliary Files through Web
Interface'' on page 570).
License Key: Opens the License Key page, which is used for installing a new
License Key file (see ''Installing License Key through Web Interface'' on page
583).
Software Upgrade: Starts the Software Upgrade Wizard for upgrading the
device's software (see ''Software Upgrade Wizard'' on page 587).
Switchover: Opens the High Availability Maintenance page, which is used for
switching between Active and Redundant devices (see High Availability
Maintenance on page 565).
IP Network
Signaling & Media
Administration
Back button: Goes back to the previously accessed page.
Forward button: Opens the page that you initially left using the back button.
Description
44
Mediant 4000 SBC
Document #: LTRT-41729