AudioCodes Mediant 4000 SBC User Manual page 488

Parameter
Source IP Group
CLI: src-ip-group-name
[IPInboundManipulation_SrcIpGr
oupName]
Source Username Prefix
CLI: src-user-name-prefix
[IPInboundManipulation_SrcUse
rnamePrefix]
Source Host
CLI: src-host
[IPInboundManipulation_SrcHos
t]
Destination Username Prefix
CLI: dst-user-name-prefix
[IPInboundManipulation_DestUs
ernamePrefix]
Destination Host
CLI: dst-host
[IPInboundManipulation_DestHo
st]
Operation Rule - Action
Manipulated Item
CLI: manipulated-uri
[IPInboundManipulation_Manipu
latedURI]
Remove From Left
CLI: remove-from-left
[IPInboundManipulation_Remov
eFromLeft]
Remove From Right
CLI: remove-from-right
[IPInboundManipulation_Remov
eFromRight]
Leave From Right
CLI: leave-from-right
[IPInboundManipulation_LeaveF
romRight]
User's Manual
REGISTER.
Defines the IP Group from where the incoming INVITE is
received.
The default is Any (i.e., any IP Group).
Defines the prefix of the source SIP URI user name (usually in
the From header).
The default is the asterisk (*) symbol (i.e., any source username
prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 713.
Defines the source SIP URI host name - full name (usually in
the From header).
The default is the asterisk (*) symbol (i.e., any host name).
Defines the prefix of the destination SIP URI user name,
typically located in the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination
username prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 713.
Defines the destination SIP URI host name - full name, typically
located in the Request URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination host
name).
Determines whether the source or destination SIP URI user part
is manipulated.

[0] Source = (Default) Manipulation is done on the source
SIP URI user part.

[1] Destination = Manipulation is done on the destination SIP
URI user part.
Defines the number of digits to remove from the left of the user
name prefix. For example, if you enter 3 and the user name is
"john", the new user name is "n".
Defines the number of digits to remove from the right of the user
name prefix. For example, if you enter 3 and the user name is
"john", the new user name is "j".
Note: If both 'Remove From Right' and 'Leave From Right'
parameters are configured, the 'Remove From Right' setting is
applied first.
Defines the number of characters that you want retained from
the right of the user name.
Note: If both 'Remove From Right' and 'Leave From Right'
parameters are configured, the 'Remove From Right' setting is
488
Mediant 4000 SBC
Description
Document #: LTRT-41729