AudioCodes Mediant 4000 SBC User Manual page 703

User's Manual
Note:
•
On the receiving side, when the first call is accepted in "Idle" state, statistics are
reset.
•
The device also generates CDRs for test calls if you have enabled CDR
generation (see Configuring CDR Reporting on page 664). To view CDRs of test
calls, see Viewing CDR Test Calls on page 639.
The statistics fields are described in the following table:
Statistics Field
Active Calls
Call Attempts
Total Established Calls
Total Failed Attempts
Remote Disconnections
Count
Average CPS
Elapsed Time
Test Status
Detailed Status
Version 7.2
Table 52-3: Test Call Statistics Description
Number of currently established test calls.
Number of calls that were attempted.
Total number of calls that were successfully established.
Total number of call attempts that failed.
Number of calls that were disconnected by the remote side.
Average calls per second.
Duration of the test call since it was started (or restarted).
Status (brief description) as displayed in the 'Test Status' field (see
''Viewing Test Call Status'' on page 702).
Displays a detailed description of the test call status:

"Idle": Test call is currently not active.

"Scheduled - Established Calls: <number of established calls>,
ASR: <ASR>%": Test call is planned to run (according to
'Schedule Interval' parameter settings) and also shows the
following summary of completed test calls:

Total number of test calls that were established.

Number of successfully answered calls out of the total
number of calls attempted (ASR).

"Running (Calls: <number of active calls>, ASR: <ASR>%)":
Test call has been started (i.e., the Dial command was clicked)
and shows the following:

Number of currently active test calls.

Number of successfully answered calls out of the total
number of calls attempted (Answer Success Ratio or ASR).

"Receiving (<number of active calls>)": Test call has been
automatically activated by calls received for this configured test
call endpoint from the configured remote endpoint. When all
these calls terminate, the status returns to "Idle".

"Terminating (<number of active calls>)": The Drop Call
command has been clicked to stop the test call and the test call
is in the process of terminating the currently active test calls.

"Done - Established Calls: <number of established calls>, ASR:
<ASR>%": Test call has been successfully completed (or was
prematurely stopped by clicking the Drop Call command) and
shows the following:

Total number of test calls that were established.
703
52. Testing SIP Signaling Calls
Description
Mediant 4000 SBC