Configuring Supplementary Services - AudioCodes Mediant 800B User Manual

User's Manual
25

Configuring Supplementary Services

This section describes SIP supplementary services that can enhance your telephone
service.
Notes:
The Supplementary Services page is used to configure many of the discussed
supplementary services parameters. For a description of the parameters appearing on this
page, see 'Configuration Parameters Reference' on page 643.

To configure supplementary services parameters:
1. Open the Supplementary Services page (Configuration tab > VoIP menu > GW and
IP to IP submenu > DTMF & Supplementary submenu > Supplementary Services).
Version 6.6

All call participants must support the specific supplementary service that
is used.

When working with certain application servers (such as BroadSoft's
BroadWorks) in client server mode (the application server controls all
supplementary services and keypad features by itself), the device's
supplementary services must be disabled.
Figure ‎ 2 5-1: Supplementary Services Page
‎ 2 5. Configuring Supplementary Services
349 Mediant 800B GW & E-SBC