Quality Of Service Parameters - AudioCodes Mediant 800B User Manual

Enterprise session border controller analog & digital voip media gateway
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

User's Manual
Parameter

51.1.4 Quality of Service Parameters

The Quality of Service (QoS) parameters are described in the table below.
Parameter
Layer-2 Class Of Service (CoS) Parameters (VLAN Tag Priority Field)
Web: DiffServ Table
EMS: QoS Settings – DSCP to QoS
Mapping
[DiffServToVlanPriority]
Layer-3 Class of Service (TOS/DiffServ) Parameters
Web: Media Premium QoS
EMS: Premium Service Class Media Diff
Serv
Version 6.6
associated with an IP interface, the static IP rule is based on destination
IP address.
When the destination of an outgoing IP packet does not match one of the
subnets defined in the Multiple Interface table, the device searches this
table for an entry that matches the requested destination host/network. If
such an entry is found, the device sends the packet to the indicated
router (i.e., next hop). If no explicit entry is found, the packet is sent to
the default gateway according to the source interface of the packet (if
defined).
The format of this parameter is as follows:
[ StaticRouteTable ]
FORMAT StaticRouteTable_Index = StaticRouteTable_InterfaceName,
StaticRouteTable_Destination, StaticRouteTable_PrefixLength,
StaticRouteTable_Gateway, StaticRouteTable_Description;
[ \StaticRouteTable ]
Note: For a description of this parameter, see 'Configuring Static IP
Routing' on page 113.
Table ‎ 5 1-4: QoS Parameters
This table parameter configures DiffServ-to-VLAN Priority
mapping. For each packet sent to the LAN, the VLAN
Priority of the packet is set according to the DiffServ
value in the IP header of the packet. The format of this ini
file is as follows:
[ DiffServToVlanPriority ]
FORMAT DiffServToVlanPriority_Index =
DiffServToVlanPriority_DiffServ,
DiffServToVlanPriority_VlanPriority;
[ \DiffServToVlanPriority ]
For example:
DiffServToVlanPriority 0 = 46, 6;
DiffServToVlanPriority 1 = 40, 6;
DiffServToVlanPriority 2 = 26, 4;
DiffServToVlanPriority 3 = 10, 2;
Notes:
For this parameter to take effect, a device reset is
required.
For a description of this table, see Configuring Quality
of Service on page
Defines the DiffServ value for Premium Media CoS
content.
645
‎ 5 1. Configuration Parameters Reference
Description
Description
116
Mediant 800B GW & E-SBC

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-sbc

Table of Contents