Parameter Settings - Panasonic FP2-PP2T Technical Manual

7.8 Parameter Settings

Set the initial operation for the positioning unit.
1. Select [Set axis]  [Parameter settings] in the menu bar, or click the [Parameter setting] icon
in the toolbar.
2. The parameter setting dialog is shown. Set the parameters.
Setting items
Parameter name
Unit setting
Pulse number per rotation
Movement amount per rotation
Pulse output mode
Pulse output rotation direction
Limit switch
Limit (+) valid logic
Limit (-) valid logic
Home valid logic
Near home valid logic
Pulse input purpose
Pulse input rotation direction
Pulse input mode
Pulse input transfer multiple
Description
The unit to be used for setting each axis.
The pulse number per rotation.
(It should be cancelled down with the movement amount per
rotation.)
The movement amount per rotation.
(It should be cancelled down with the pulse number per
rotation.)
The output method for the pulse
- Pulse/Sign method
- CW/CCW method
The rotation direction for the pulse output
CW+: + direction is CW.
CCW+: + direction is CCW.
Enable/disable the limit switch.
The logic of the limit switch in "+" direction
The logic of the limit switch in "-" direction
The logic of the home switch
The logic of the near home switch
The purpose of the pulse input
The rotation (CW/CCW) direction for the pulse input
The input method for the pulse input
The input transfer multiple for the pulse input
7-15